Key takeaways
- Run a hot empty cycle monthly and wipe the door seal dry after each wash to stop odours before they start.
- Clean the rubber seal, detergent drawer and drain filter separately. These are the spots where grime and biofilm collect.
- Descale with white vinegar or citric acid every one to three months to clear detergent and limescale buildup.
- A De Montfort University study found home machines failed to disinfect clothing in up to half of rapid cycles, so cleaning the machine itself matters.
- Front loaders need extra seal care; top loaders need attention around the agitator and the water line.
A washing machine needs its own clean once a month: a hot empty cycle, a wipe of the rubber seal, and a check of the detergent drawer and drain filter. Skip it, and trapped water turns into the musty smell that clings to freshly washed clothes.
The machine that cleans everything else rarely gets cleaned itself. Over time, detergent residue, limescale and damp build up in the drum, the seal and the filter, feeding bacteria and mould. This guide walks through each part, how to descale, the difference between front and top loaders, and a monthly routine that keeps everything fresh.
Why Regular Cleaning Prevents Odours
Odours come from grime the water leaves behind, not from the clothes. Research from De Montfort University found that home washing machines failed to disinfect clothing in 50% of rapid cycles and 33% of standard cycles, and the team traced biofilm to detergent drawers and rubber door seals (De Montfort University, 2025).
Biofilm is a sticky layer of bacteria and fungi that clings to damp surfaces. It thrives on the soap scum and body oils that cold, short washes leave behind. Once it sets in, that sour smell transfers straight to your laundry.
Cleaning the machine regularly removes the food source before odour takes hold. A hot wash, a dry seal and an open door do most of the work. The rest is keeping the hidden parts clear so moisture never has a place to sit.

How Do You Clean the Drum, Seals and Filter?
Clean these three parts separately, because each traps a different kind of grime. The same De Montfort University study found biofilm concentrated in the rubber seal and detergent drawer, the two spots most people never touch. A single surface wipe will not reach them.
The drum
Run the hottest empty cycle your machine offers. Add two cups of white vinegar to the drum, or a dedicated washing machine cleaner to the dispenser. The heat and acid loosen soap scum and kill most odour-causing microbes. For a second pass, sprinkle a quarter cup of bicarbonate of soda into the drum and run a short hot rinse.
The seal
On front loaders, fold back the rubber door gasket and wipe inside the folds with a damp cloth and a little vinegar. Hair, coins and black mould collect here. Dry it fully afterwards.
The filter
Most front loaders have a drain pump filter behind a small hatch at the bottom front. Place a towel and shallow tray underneath, unscrew the cap slowly to drain the water, then rinse out the lint, buttons and grit. Check it every month or two.
How Do You Descale to Remove Detergent Build-Up?
Descaling clears the chalky limescale and hardened detergent that a normal wash leaves behind, and it matters more in hard-water areas. Mineral deposits coat the heating element and drum, which makes the machine work harder and wash less effectively. Many South African regions have moderately hard water, so buildup is common.
To descale, run the hottest empty cycle with one of these in the drum:
- Two cups of white vinegar for light, routine buildup.
- A quarter cup of citric acid powder for heavier limescale.
- A commercial descaler, following the pack instructions.
Do this every one to three months. If you see white flaky residue around the drum or the dispenser, scale has built up and it is time. Heavy scale also strains the heating element, which ties directly into how much power the machine draws. For more on keeping appliances efficient, see our guide to energy-saving tips for your home appliances.
Never mix vinegar and bleach, or vinegar and commercial cleaners, in the same cycle. The combination can release harmful fumes. Use one product per wash and rinse between them.
Front Loader vs Top Loader Cleaning Tips
Front loaders need more seal care, while top loaders need attention around the agitator and the water line. The two designs trap moisture differently, so the cleaning focus shifts. Front loaders seal tightly and hold water in the door gasket, which is exactly where biofilm likes to grow.
For front loaders:
- Wipe and dry the rubber door seal after every wash.
- Leave the door and detergent drawer open between loads so air can circulate.
- Clean the drain filter every month or two.
For top loaders:
- Wipe around the agitator and the underside of the lid, where splashes dry into scum.
- Scrub the ring at the top of the drum, where the water line leaves a mark.
- Run a hot cycle with vinegar, then leave the lid up to dry the interior.
Both types benefit from the monthly hot maintenance wash. The difference is simply where the grime hides. If you are shopping for a new machine and weighing the two styles, our guide on how to choose a washing machine for your home breaks down the trade-offs. Bunnystore stocks both front and top loaders if you decide it is time to upgrade.

A Simple Monthly Maintenance Routine
A short routine keeps the machine fresh without much effort. The goal is to stop moisture and residue from settling, since that is what research links to the biofilm that causes odour and poor cleaning. Build these habits and deep cleans become quick.
After every wash:
- Wipe the door seal dry and leave the door open.
- Pull the detergent drawer open a little so it can air.
- Shake out and hang any damp items you cannot move straight to the dryer.
Once a month:
- Run a hot empty maintenance cycle with vinegar or a machine cleaner.
- Wipe the seal, drawer and drum opening.
- Check the drain filter and clear any lint or debris.
Every one to three months:
- Descale with vinegar or citric acid, more often in hard-water areas.
- Pull out the detergent drawer completely and scrub it in warm soapy water.
- Inspect the hoses for kinks or residue.
Using less detergent also helps, since excess soap is what feeds buildup in the first place. Measure to the dose on the pack rather than eyeballing it.
Start with a single hot maintenance wash this week, then set a monthly reminder on your phone. That one habit does more to keep your laundry smelling clean than any amount of fabric softener.
Frequently asked questions
How often should I clean my washing machine?
Run a hot empty maintenance wash once a month, wipe the seal and leave the door open after every use, and do a deeper descale every one to three months depending on how hard your water is.
Can I clean my washing machine with vinegar?
Yes. Pour about two cups of white vinegar into the drum or dispenser and run the hottest empty cycle. Vinegar dissolves limescale and detergent residue and helps cut odour-causing grime.
Why does my washing machine smell bad even after cleaning?
Trapped moisture is usually the cause. Check the rubber seal folds, the detergent drawer and the drain filter, since biofilm builds up in these hidden spots. Dry them and leave the door open between washes.
Is it safe to use bleach in my washing machine?
You can use a diluted bleach cycle occasionally to kill mould, but never mix it with vinegar or other cleaners. Run a second empty rinse afterwards so no residue transfers to your clothes.
Do front loaders get dirtier than top loaders?
Front loaders tend to trap more moisture in the door seal and drum, which encourages biofilm. They need more frequent seal cleaning, while top loaders mainly need attention around the agitator and water line.
1 Comment